Ekta Enterprises

The EKC Oxygen Cylinder 46.7 Ltr is a high-pressure, seamless steel cylinder manufactured by Everest Kanto Cylinder Ltd. (EKC), a leading producer of gas cylinders in India. This cylinder is commonly referred to as a D-Type or Jumbo Oxygen Cylinder and is widely used in medical, industrial, and laboratory settings.

🔧 Key Specifications

• Water Capacity: 46.7 liters

• Oxygen Gas Capacity: Approximately 7,000 liters (7 cubic meters)

• Working Pressure: 150 kg/cm² at 15°C

• Test Pressure: 250 kg/cm²

• Material: Seamless manganese steel

• Weight: Approximately 51 kg

• Height with Valve: Approximately 1,445 mm

• Outer Diameter: Approximately 232 mm

• Wall Thickness: Approximately 5.5 mm

• Valve Type: IS:3224 (Bullnose or Pin Index)

• Compliance: IS 7285 Part II, BIS certified, PESO approved

🏥 Applications

• Medical Use: Hospitals, ambulances, clinics, and home oxygen therapy

• Industrial Use: Welding, cutting, and other fabrication processes

• Laboratory Use: Controlled oxygen environments

A Rama Oxygen Cylinder 46.7 Ltr typically refers to a high-pressure industrial or medical-grade oxygen cylinder manufactured or distributed by Rama Cylinders Pvt. Ltd., a known supplier in India. Here's a breakdown of the key specifications and typical use:

�� Key Specifications (Typical)

• Water Capacity: 46.7 Liters (this is the volume of the cylinder itself, not the gas inside)

• Gas Capacity: ~7 cubic meters (m³) of oxygen when filled at 150 bar pressure

• Working Pressure: 150 to 200 bar (check cylinder markings)

• Material: Seamless steel

• Usage: Medical oxygen supply, industrial welding, cutting, or lab use

• Weight: Around 50–60 kg (depending on wall thickness)

• Valves: IS:3224 or equivalent standard valve (e.g., Bullnose or Pin Index)

�� Applications

• Medical: For hospitals, ambulances, and home oxygen therapy

• Industrial: Cutting, welding, and other fabrication processes

• Laboratory: Controlled oxygen environments

Would you like a datasheet, refill info, or safety instructions for this cylinder?